-
Delivery
Dispatched every Tuesday and Thursday with next day delivery
-
Not Sure This is Right
Contact us for advice
-
Warranty
Manufacturers warranty comes with every item purchased
Free Delivery, On Orders Over £50
Dispatched every Tuesday and Thursday with next day delivery
Contact us for advice
Manufacturers warranty comes with every item purchased
Mains 240V electrical hook up kit
Easily add luxury to your camper with a mains hook up system, meaning you can have 240V power in your camper when you're on a campsite.
Product description
When you plug into the mains 240V or "hook up" your leisure battery will be charged automatically from the mains to leisure battery charger. Once it's first set up, you won't need to touch it again it will remember it's setting and charge when plugged. When the battery is full, it will go into float mode.
Component descriptions
Some of these components can be swapped out using the menus above in one of four categories.
Mains consumer unit
A 1-way double pole consumer unit with a 10A 30mA RCBO to give both shock and overload protection in series. Overall dimensions are 135mm x 95mm x 90mm (W x L x H)
Outlet Sockets & number of sockets
Available in a choice of finishes and you can add up to 4 double sockets in this kit.
All of the outlet sockets come in a double, with 2 x standard 3 pin UK plug outlets.
They are all provided with a back box too, the back boxes mount in behind the sockets to make sure the terminals aren't exposed.
Inlet socket
Covered surface mounted inlet socket. This is the best socket for mounting under the bonnet or beneath the rear bumper. It has two mounting screws on the base and takes a standard 3 pin round blue hook up lead. It is wired from the back of the pins, using screw clamp type fastenings.
Flush mounted inlet socket. This uses the same 3 pin round blue hook up lead to connect between the site post and your camper. It's designed to be mounted through the side of the van by cutting a hole. Supplied with a backing gasket (we use this as a template for cutting the hole). It has 4 screw holes, one in each corner to compliment the recommended fixing/sealing methods. Available in white or black.
Battery charger
8A mains to leisure battery charger. This is a 7 stage smart charging unit which is capable of charging and maintaining leisure battery banks of up to 160Ah. (approx). Complete with separate charging modes for wet, gel and AGM batteries. The unit has holes for screw mounting to a board. Solid-state without a cooling fan to ensure a quiet night's sleep even when hooked up. Comes supplied with a 3 pin fused plug to plug into the single socket. The DC wiring is detachable through a quick-release plug and comes wired with ring terminals to bolt onto your leisure battery. This is a fit-and-forget unit.
Easy install, supplied with wiring diagrams
Expert aftersales care provided
Small consumer unit size
Vendor: | Rayne Automotive |
---|---|
Type: | Basic Wiring Kits, Mains Hook Up Kits |
Inlet socket type: | Black flush mount, Covered surface mount, White flush mount |
Number of double sockets: | 1, 2, 3, 4 |
Mains socket finish: | Black nickel, Brushed silver, C-line black, C-line silver |
SKU: | EHUB201STK46BN |
Rayne Automotive has always had one simple principle to operate from; the customer comes first. This is why we design and tailor products not just for each individual vehicle, but for every customer.