Electrical Mains 240V 20A 1-Way RCBO Hook Up Kit

inc. VAT
Inlet socket type: Black flush mount
Number of double sockets: 1
Mains socket finish: Black nickel

Mains 240V electrical hook up kit

Easily add luxury to your camper with a mains hook up system, meaning you can have 240V power in your camper when you're on a campsite.

Product description

When you plug into the mains 240V or "hook up" your leisure battery will be charged automatically from the mains to leisure battery charger. Once it's first set up, you won't need to touch it again it will remember it's setting and charge when plugged. When the battery is full, it will go into float mode.

Component descriptions

Some of these components can be swapped out using the menus above in one of four categories.

Mains consumer unit

A 1-way double pole consumer unit with a 10A 30mA RCBO to give both shock and overload protection in series. Overall dimensions are 135mm x 95mm x 90mm (W x L x H)

Outlet Sockets & number of sockets

Available in a choice of finishes and you can add up to 4 double sockets in this kit.

All of the outlet sockets come in a double, with 2 x standard 3 pin UK plug outlets.

They are all provided with a back box too, the back boxes mount in behind the sockets to make sure the terminals aren't exposed.

Inlet socket

Covered surface mounted inlet socket. This is the best socket for mounting under the bonnet or beneath the rear bumper. It has two mounting screws on the base and takes a standard 3 pin round blue hook up lead. It is wired from the back of the pins, using screw clamp type fastenings.

Flush mounted inlet socket. This uses the same 3 pin round blue hook up lead to connect between the site post and your camper. It's designed to be mounted through the side of the van by cutting a hole. Supplied with a backing gasket (we use this as a template for cutting the hole). It has 4 screw holes, one in each corner to compliment the recommended fixing/sealing methods. Available in white or black.

Battery charger - Victron BlueSmart IP22 20A Mains Charger

  • Will charge battery banks of 200Ah to 350Ah.
  • Suitable for LiFe Po4 batteries
  • Fitted with M8 eyes for DC battery connection
  • UK 3 pin 13A plug fitted for 240V connection.

The charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life

The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

Kit contents

  • Mains consumer unit (un-wired).
  • 5M Mains 2.5mm2 arctic flex cable.
  • 4mm2 bonding wire.
  • Mains inlet socket, either covered surface mount or flush mounted (selectable above).
  • Either 1, 2, 3 or 4 double 240V sockets in a colour of your choice.
  • Single mains socket in white (for the battery charger to plug into).
  • Mains to leisure battery charger Victron BlueSmart 20A.

Key features

  • Easy install, supplied with wiring diagrams

  • Expert aftersales care provided

  • Small consumer unit size

Vendor: Rayne Automotive
Type: Basic Wiring Kits, Mains Hook Up Kits
Inlet socket type: Black flush mount, Covered surface mount, White flush mount
Number of double sockets: 1, 2, 3, 4
Mains socket finish: Black nickel, Brushed silver, C-line black, C-line silver