Mains 240V electrical hook up kit

Easily add luxury to your camper with a mains hook up system, meaning you can have 240V power in your camper when you're on a campsite

Product description

When you plug into the mains 240V or "hook up" your leisure battery will be charged automatically from the mains to leisure battery charger. Once it's first set up, you won't need to touch it again it will remember it's setting and charge when plugged. When the battery is full, it will go into float mode.

Component descriptions

Some of these components can be swapped out using the menus above in one of four categories.

Mains consumer unit

A 2-way double pole consumer unit with a 40A 30ma Type A RCD combined in series with 6A and 16A double pole MCBs. Overall dimensions are 170mm x 150mm x 90mm (W x L x H)

Outlet Sockets & number of sockets

Available in a choice of finishes and you can add up to 4 double sockets in this kit.

All of the outlet sockets come in a double, with 2 x standard 3 pin UK plug outlets.

They are all provided with a back box too, the back boxes mount in behind the sockets to make sure the terminals aren't exposed.

Inlet socket

Covered surface mounted inlet socket. This is the best socket for mounting under the bonnet or beneath the rear bumper. It has two mounting screws on the base and takes a standard 3 pin round blue hook up lead. It is wired from the back of the pins, using screw clamp type fastenings.

Flush mounted inlet socket. This uses the same 3 pin round blue hook up lead to connect between the site post and your camper. It's designed to be mounted through the side of the van by cutting a hole. Supplied with a backing gasket (we use this as a template for cutting the hole). It has 4 screw holes, one in each corner to compliment the recommended fixing/sealing methods. Available in white or black.

Battery charger - Victron BlueSmart IP22 20A

20A mains to leisure battery charger. This unit is a Victron's IP22 single output 20A charger which is capable of charging and maintaining leisure battery banks of up to 400Ah. (approx).(it's not recommended to use this on battery banks less than 160Ah). Comes supplied with a 3 pin fused plug to plug into the single socket. The DC wiring comes wired with ring terminals to bolt onto your leisure battery. This is a fit-and-forget unit. This unit can be used with Lithium leisure batteries also.

Kit contents

• Mains consumer unit (un-wired).
• 5M Mains 2.5mm2 arctic flex cable.
• 4mm2 bonding wire.
• Mains inlet socket, either covered surface mount or flush mounted (selectable above).
• Either 1, 2, 3 or 4 double 240V sockets in a colour of your choice.
• Single mains socket in white (for the battery charger to plug into).
• Mains to leisure battery charger - Victron BlueSmart IP22 20A

Key features

• Easy install, supplied with wiring diagrams

• Expert aftersales care provided

• Small consumer unit size